Here are the instructions for using the "Historical data combination" feature in BTS 8.0:
1. Right-click and select "Save As" to save the data file being tested.
2. Then "Single stop" to pause the test.
3. Right-click and select "Historical data combination".
4. Select the data file you have just saved (this is for demonstration only, please select the data file you need to successively test according to your own needs).
5. Then click "Ok."
6. It is worth noting that when using the "Historical data combination" function, the data file (Nda/Ndax format) to be continued should be saved when the channel is in the "Stop" state.
7. After importing the data file, the channel status will remain "stop". You need to right-click again and select "Continue" for the channel to continue to be tested using historical data.
8. If the "Historical data combination" option is not available in the right-click menu, go to the top of the page and select "Set."
9. Choose "System settings," under "Display settings," check "Historical data combination" and "Batch historical data connection" according to your needs.
10. Then click "Save."
11. Enter username: admin and password: neware.
12. Click Confirm to add "Historical data combination" to the context menu.
This operation video tutorial is applicable to the following products:
● CT-4000 Battery Testing System Series (CT-4008Q-5V100mA, CT-4008Q-5V6A-S1, CT-4008Q-5V6A-164, CT-4008Q-5V12A-S1, CT-4008Q-5V12A-164, etc.)
● CE-6000 Battery Testing System Series (Cell, Module, Pack, etc.)
● CT/CTE-8000 Battery Testing System Series (CT-8002Q-5V100mA, CTE-8008-5V200A, etc.)
● All-in-One Battery Testing System Series (WHW-25L-S-16CH, WIHW-200-160CH-B, WHW-100L-2-160CH, WHW-500L-5V6A80CH-380V, WGDW-380L-2-40BFC-5V600A8CH, etc.)
